Why there is a need for wireless crane remote control in the Industrial sector?

 

Techniques to control the electronic machine remotely:

The electronic machine or electrical equipment that can be moved from one place to another comes under the wireless technology systems. And this type of mechanism is known as radio remote control. This wireless technology is also used in the industrial sector for managing the crane and hoist.

The industrial crane works on electrical systems and uses radio remote devices. Because of that, the overhead crane is managed in proper directions like long travel(LT), cross travel(CT), and hoist. The hoist is attached to the crane used for loading and unloading the heavy materials with the help of wired rope.

How radio remote control behaves for Industrial cranes:

The transmission of the signal in the middle of the transmitter and receiver is based on radio waves technology. These radio waves are a part of electromagnetic waves. The electromagnetic waves that vibrate in the frequency range 10 kHz to 300 GHz are considered to be radio waves and microwaves. The radio waves don't require any medium to travel like sound waves.

For communication, the industrial crane remote control system requires two units i.e. transmitter and receiver. The transmitter is a small handheld device that is operated by the ground operator. The transmitter device has many push buttons like start, stop, left, right, up, down, forward, and reverse. These buttons help to move the crane in a proper direction. 

The receiver is placed at the other end for receiving the signal from the transmitter device. When the operator press the button on the transmitter device the signal is sent in the encryption form to the receiver. The receiver has an antenna from which it receives the signal. 

The push-button on the EOT crane radio remote is configured with the interlocked feature. Due to this interlocking two buttons in the pair cannot be used at the same time. If we have to move the crane in the forward direction then we have to keep pressing the forward button until it reaches the destination.

While communicating with the end receiver device the overhead crane remote control systems monitor many things like the number of successful transmissions, the lost packet, the quality of the signal, the number of errors that occurred, the signal strength, the range of a signal, the communication gap in the middle of receiver and transmitter, the battery percentage, etc.

The transmitter and receiver device performs closed-loop communication while transmitting the signal. Because of this, the electric power is automatically adjusted by the transmitter device depending on the distance. If the gap is minimal then the transmitter device consumes less energy. And if it is far then the transmitter device consumes more energy.

The aspects of wireless remote control for EOT crane: 

1) The transmitter device automatically adjusts the electric power according to the distance.

2) The hopping frequency technique is used by the radio remote device to avoid unwanted trespassers and to keep changing the continuous transmission of a signal.

3) The radio remote control for EOT crane is coated in such a manner that it can protect from electric shock and rust.

4) The transmitter device uses the 2.4 GHz frequency band for transmission of a signal that is globally used.

5) The wireless remote control device is highly optimized and customized.

6) The radio remote control for the crane works on the wireless systems and hence it eliminates the need for wired cable technology that results in cost-effectiveness.

7) The battery used in the transmitter device is durable and can be used for a minimum of six months.

8) The communication process in the middle of the receiver and transmitter happens more than ten times in a second.

9) The transmitter can communicate with the receiver in the range of 10 meters to 200 meters depending upon the signal.

10) The wireless radio remote device sends the signal in encrypted form to the receiver.

11) The receiver also transmits the signal to the transmitter as successful acceptance of the data packet. 

Industrial crane remote control manufacturer:

Yes, wireless technology should be used more as compared to wired technology. In the wireless systems, the operator can manage the overhead crane from a safe distance also. Communication is faster and safer than wired cable systems. The radio remote device is less expensive as compared to the wired systems. Because of this most industries and manufacturing companies moving towards wireless technology systems.

The Anand Systems Engineering Private Limited is the leading crane remote control manufacturers in India. The device is made according to the client's needs. The transmitter device is reliable and comfortable to use. The radio remote device can be used for despotic industrial use also. The transmitter comes in various types such as two buttons, four buttons, six buttons, eight buttons, and twelve buttons. For crane remote control price and its more factor visit the official website.